PIC-P18 development product board.
One of the problems before starting to program is that a proto board will always have to be fabricated first.
This always takes a lot of time and thought, so this is a product and development board in one with many options.
PIC-P18 board is an development and product board which allow you to prototype, product and
develop code for all Microchip’s PIC microcontrollers with 18 pins.
The on-board ICSP connector allow you to program the PIC on the board without pulling it of the socket,
by ICSP programmer to program and debug it .
Voltage regulator is made with LM317 adjustable voltage regulator and have pcb jumper which selects
what voltage you supply to the PIC microcontroller +3.3V or +5V, so you can work with PICs on both low
and normal voltage.
We left the RS 232 behind as a lot of USB is used such as with the CP2102 USB to TTL Serial UART Bridge.
https://www.otronic.nl/nl/cp2102-usb-naar-ttl-serial-uart-bridge-33v-5v.html
It is possible to install a shiftregister HC595 for 8 additional outputs for example, control relays
All ports are externally available for further use
An LED test board is also available for testing the shift register output
IMPORTANT: all programmers provide power supply through
ICSP connector during the programming PIC-P18 should not be
powered via the external power jack!
PIC-P18 have 3 user buttons Menu, Up and Down for user input connected to PIC microcontroller’s
RB4, 5 and 6 port.
Coming soon
See also: PRODUCTS : PIC-18-pins-prod
